Ultralight 22.6g Carbon Fiber Seatpost Clamp Kit for Pinarello F8, Dogma F12, Dogma F, X Series & 2025 Models

This Ultralight Carbon Fiber Seatpost Clamp Kit is designed specifically for Pinarello road bikes from the F8 generation onward, including Dogma F12, Dogma F, X Series, and the latest 2025 models.

The clamp base is manufactured from prepreg carbon fiber and formed using a high-pressure compression molding process, ensuring excellent structural integrity while maintaining extremely low weight. The overall stack height is identical to the original factory clamp, allowing for a direct replacement without changing saddle position or fit.

Despite its lightweight design, this clamp system offers outstanding strength and reliability. Different material configurations are available to meet varying rider weight and usage requirements, from everyday riding to high-intensity training and racing.

Compared to the original factory 3D-printed seatpost clamp, this kit achieves a weight reduction of approximately 30 grams, making it an ideal upgrade for riders focused on performance optimization and clean integration.

Load Capacity Options

This seatpost clamp kit is available with multiple load-rated configurations:

• Aluminum Saddle Rail Kit: supports riders up to 95 kg

• Titanium Saddle Rail Kit: supports riders up to 120 kg

• Carbon Fiber Base Clamp: optimized for lightweight builds with high stiffness

The titanium version uses S-PARTS TC4 titanium bolts, providing increased load capacity and long-term durability while maintaining a minimal overall system weight.

Key Features

• Designed for Pinarello F8, Dogma F12, Dogma F, X Series, and newer models (including 2025 frames)

• Ultralight prepreg carbon fiber base

• High-pressure molded construction for strength and dimensional accuracy

• Same installation height as the original factory clamp

• Multiple load-rated configurations available (up to 120 kg)

• S-PARTS TC4 titanium bolts included

• Approx. 30 g lighter than the stock 3D-printed clamp

• Clean, reliable, and race-ready seatpost clamping solution

Materials

• Clamp base: Prepreg carbon fiber

• Bolts: S-PARTS TC4 titanium (for titanium kit version)

• Manufacturing process: High-pressure molding + precision finishing

What’s Included

• Carbon fiber seatpost clamp assembly × 1 set

• S-PARTS titanium bolts × 2

Please leave a note at checkout to specify your preferred bolt color.

Compatibility

• Pinarello F8

• Pinarello Dogma F12

• Pinarello Dogma F

• Pinarello X Series

• Pinarello 2025 and newer road frames

Installation Notes

• Install according to Pinarello’s recommended torque specifications

• Use a torque wrench to prevent over-tightening

• Ensure proper alignment before final tightening

호환성 확인: 원제조업체(OEM) 부품의 모델과 배치가 복잡하기 때문에 이 제품이 호환되지 않는 경우가 있을 수 있습니다.

제품을 받으신 후 설치 전에 OEM 사양과 비교하여 호환성을 확인해 주시기 바랍니다.

토크 사양: 이 제품은 OEM 부품 매뉴얼에 명시된 토크 값에 따라 엄격히 설치하십시오. 설치 문제: OEM 사양과 차이가 있거나 설치 초기 단계에서 어려움이 발생할 경우 즉시 중단하고 반품 또는 교환을 위해 고객 서비스에 문의하십시오.

강제 설치 금지: 어떠한 경우에도 강제로 설치하지 마십시오. 책임: 이 제품(또는 그 부품)의 강제 설치 또는 무단 개조로 인한 모든 손해는 구매자의 단독 책임입니다.

모든 제품은 수령 시 보게 될 색상을 정확하게 표현하기 위해 촬영되었습니다.

조명, 각도 또는 화면 설정의 차이로 인해 약간의 색상 차이가 발생할 수 있습니다.

실제 제품을 기준으로 생각해 주시기 바랍니다. "컬러" 및 "블루" 제품의 경우 염색 과정에서 색상 분포가 고르지 않을 수 있어 각 제품이 독특합니다.